At a Glance: Geohex vs Concrete
Comparing Geohex permeable paving systems with concrete highlights key differences in how each surface performs over time.
- Geohex allows water to drain through the surface, concrete does not
- Geohex is flexible and tolerates ground movement, concrete can crack
- Concrete provides a sealed, decorative finish, Geohex is permeable
- Geohex can be more cost-effective for larger or drainage-challenged sites
- Concrete requires less visible maintenance but higher repair cost if it fails
- Both require proper base preparation for long-term performance
Geohex vs Concrete: What’s the Real Difference?
Choosing between Geohex and concrete isn’t just about appearance or upfront cost.
It comes down to how each surface interacts with the ground, water, and long-term use.
Concrete creates a rigid, sealed surface.
Geohex creates a stabilised, permeable surface that works with the ground beneath it.
That difference drives performance across every key area.
Drainage and Water Management
This is one of the biggest differences.
Concrete is non-permeable. Water runs off the surface, which can lead to pooling, runoff, and additional drainage requirements.
Geohex permeable paving system allows water to pass through the surface and into the ground below.
This can:
- Reduce pooling and surface water
- Lower pressure on drainage systems
- Improve performance in areas with poor natural drainage
For sites with drainage challenges, this alone can be the deciding factor.
Cracking vs Ground Movement
Concrete is strong but rigid.
If the ground moves due to moisture changes, reactive soils, or settling, the stress is absorbed by the slab, which often results in cracking.
Geohex is not a rigid slab.
It distributes load through a grid structure and can accommodate minor ground movement without structural failure.
This makes it better suited to:
- Reactive soils
- Sloped sites
- Areas with variable ground conditions
Cost Considerations
Upfront cost is only part of the equation.
Concrete can appear cost-effective initially, but additional factors often come into play:
- Excavation and drainage requirements
- Reinforcement and finishing
- Repair costs if cracking occurs
Geohex systems can be more cost-effective in many applications, particularly:
- Larger areas
- Sites requiring drainage solutions
- Projects where installation flexibility is important
The total installed cost depends heavily on site conditions and preparation.
Installation and Flexibility
Concrete requires:
- Formwork
- Pouring and curing time
- Limited flexibility once installed
Geohex installation involves:
- Base preparation
- Panel placement
- Infill with gravel or turf
It can often be installed more quickly and adjusted as needed during the process.
It is also more accessible for DIY installation compared to concrete.
Maintenance and Long-Term Performance
Concrete generally requires minimal day-to-day maintenance but can be costly to repair if damaged.
Cracks are often permanent and may worsen over time.
Geohex requires minimal maintenance, typically limited to occasional topping up of infill material.
Because it is not a rigid surface, it avoids many of the long-term cracking issues associated with concrete.
When to Choose Geohex vs Concrete
Geohex is typically better for:
- Sites with drainage issues
- Large driveways or access areas
- Gravel stabilisation
- Projects where flexibility is important
Concrete is typically better for:
- Decorative, sealed finishes
- High-end visual applications
- Areas where permeability is not required
Final Thoughts
The choice between Geohex and concrete comes down to the problem you’re trying to solve.
If you need a rigid, sealed surface, concrete remains a strong option.
If drainage, flexibility, and long-term ground performance are priorities, Geohex offers a practical alternative.
Understanding the site conditions and intended use is critical to making the right decision.
–
If you’re planning a driveway, pathway, or access area and want a solution that balances strength, drainage, and cost, Geohex is a proven option.
Melbourne Brick Company supplies Geohex permeable paving systems for a wide range of residential and commercial applications, with stock available for projects of all sizes.
View product specifications, sizes, and pricing online, or speak with our team about the right solution for your project.
Frequently Asked Questions on Geohex vs Concrete Driveways: Cost, Drainage and Performance
Is Geohex cheaper than concrete?
In many cases, yes, particularly for larger areas or sites with drainage requirements. Total cost depends on preparation and site conditions.
Does Geohex last as long as concrete?
Geohex is designed as a durable long-term solution. Lifespan depends on installation quality and usage conditions.
Will Geohex move over time?
When installed correctly, the grid structure stabilises infill and significantly reduces movement compared to loose gravel.
Does concrete always crack?
Not always, but cracking is common over time, particularly in reactive soils or poorly prepared bases.

